Lexicon RV-8 Instrukcja Użytkownika

RV-8 Receiver User Guide

Getting Started Lexicon1-4 HIGHLIGHTS• Eight channels• Eight configurable inputs• Three independent zones• Integrated 7-channel amplifier with thermal

Setup Lexicon3-52PERFORMING AUTOMATIC CALIBRATION (continued) Message Description TroubleshootingThe RV-8 successfully calibrated the value for the se

RV-8 Setup3-53MANUAL CALIBRATIONSelecting the SPEAKER SETUP menu MANUAL option displays the MANUAL SPEAKER SETUP menu, to manually calibrate speaker d

Setup Lexicon3-54PERFORMING MANUAL SPEAKER DISTANCE CALIBRATIONSelecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option displays the SPEAKER D

RV-8 Setup3-55PERFORMING MANUAL OUTPUT LEVEL CALIBRATION Selecting the MANUAL SPEAKER SETUP menu LEVELS CALIBRATION option displays the LEVELS CALIBRA

Setup Lexicon3-56INTERNAL NOISE TESTOpens the INTERNAL NOISE message shown on the previous page,which indicates that the internal noise test generates

RV-8 Setup3-57EXTERNAL NOISE TESTSelecting the LEVELS CALIBRATION menu EXTERNAL NOISE TESToption opens the SPEAKER LEVEL ADJUST menu shown on page 3-5

Setup Lexicon3-58SETTING BASS PEAK LIMITERSThe BASS PEAK LIMITERS option displays the BASS PEAK LIMITERS menu, to set amplitude limits on low-frequenc

RV-8 Setup3-59LIMITER ON, OFFLimits low-frequency signals sent to the subwoofer or redirected toother speakers. To set the LIMITER parameter:•Select

Setup Lexicon3-60I/O CONFIGThe I/O CONFIG option is used to configure the analog audio input connectors as eight (Left/Right) stereo connectors, five

RV-8 Setup3-615 ST. & (1) 5.1 ANLGConfigures the analog audio input connectors as five stereoconnectors and one 5.1-channel configuration.When the

RV-8 Getting Started1-5PRODUCT REGISTRATIONPlease register the RV-8 Receiver within 15 days of purchase.Register online at www.lexicon.com or complete

Setup Lexicon3-62I/O CONFIG (continued)MAIN 7.1When set to MAIN 7.1, all of the amplifier outputs on the rear panelwill be configured for use in the M

RV-8 Setup3-63DISPLAY SETUPSelecting the SETUP menu DISPLAYS option opens the DISPLAY SETUP menu, which is used to customize the on-screen and front-p

Setup Lexicon3-64ON-SCREEN DISPLAY SETUPOpens the ON-SCREEN DISPLAY menu, which is used to customize the on-screen display.STATUS ALWAYS ON, 2 SECONDS

RV-8 Setup3-65POSITION TOP, CENTER, BOTTOMControls the vertical position of the two-line status on the displaydevice screen. When set to TOP, the two-

Setup Lexicon3-66FRONT-PANEL DISPLAY SETUPOpens the FRONT PANEL DISPLAY menu, which is used to customize the front-panel display.STATUS ALWAYS ON, 2 S

RV-8 Setup3-67A/V SYNC DELAY OFF, 1 to 60msRestores audio/video synchronization when using products such asvideo processors that introduce a video sig

Setup Lexicon3-68VOLUME CONTROL SETUPOpens the VOLUME CONTROL SETUP menu, which is used to configure Main Zone, Zone 2, Zone 3, and Headphone volume l

RV-8 Setup3-69Z3 PWR ON LAST LVL, –80 to +12dBSets the Zone 3 volume level that will be selected whenever Zone 3 isactivated. When set to LAST LVL, Zo

Setup Lexicon3-70TRIGGER SETUPSelecting the SETUP menu TRIGGER option opens theTRIGGER SETUP menu shown to the right, which can be usedto configure th

RV-8 Setup3-71PROGRAM OPERATION PARAMETERS ON, OFFConfigure the trigger output connector labeled 1 forprogram operation. All TRIGGER SETUP menu parame

Getting Started Lexicon1-6REMOTE CONTROL BATTERY INSTALLATIONThe remote control requires four AAA batteries. The batteries should be replaced as neede

Setup Lexicon3-72TUNER SETUPSelecting the SETUP menu TUNER SETUP option opens the TUNER SETUP menu, which is used to configure the AM/FM radio tuner.R

RV-8 Setup3-73SCAN SENS LOW, MED, HIGHSelects the Scan Sensitivity parameter, which can be used to set thethreshold the system will use to tune to a n

Setup Lexicon3-74TUNER SETUP (continued)AUTOLOADAutomatically scans and stores presets for the currently selectedfrequency band. To select the AUTOLOA

RV-8 Setup3-75CLEAR ALLClears all of the presets. When this option is highlighted, press theright () arrow to select. The message “PRESS RIGHT  TO C

Setup Lexicon3-76TUNER SETUP (continued)DISPLAY RDS NAME, PRESET NAME, FREQUENCYIdentifies the current channel setting, in the top right corner of the

RV-8 Setup3-77RADIO TEXT ON, OFFActivates the RADIO TEXT (RT) feature. Radio Text is presented asscrolling text in the bottom row of the front-panel a

Setup Lexicon3-78TUNER SETUP (continued)AUTO FREQUENCY ON, OFFChecks for alternate frequency broadcasts in case of station drop outor signal fade. The

RV-8 Setup3-79LOCK OPTIONSSelecting the SETUP menu LOCK OPTIONS option opens the LOCK OPTIONS menu, which is used to protect MODE ADJUST, AUDIO CONTRO

Setup Lexicon3-80LIVE! CALIBRATIONLIVE! (Lexicon Intelligent Variable Environment) is a proprietary modedesigned to transform the way your listening r

RV-8 Setup3-81POSITIONING THE MICROPHONES FOR LIVE!Refer to the microphone placement examples below to position the microphones for LIVE!FrontLeftCent

2Basic OperationFront-Panel Overview ...2-2Rear-Panel Overview...

Setup Lexicon3-82FrontLeftCenterSubwooferFrontRightSideRightRearRightRearLeftSideLeftMicrophoneWhen positioning the microphones, DO NOT:7 Place the mi

RV-8 Setup3-83PERFORMING LIVE! CALIBRATION To perform LIVE! calibration:1. Select SETUP  LIVE! CALIBRATION as shown above.2. The !CAUTION! HIGH AUDIO

4Audio ControlsAudio Controls...4-2

Audio Controls Lexicon4-2AUDIO CONTROLSSelecting AUDIO CONTROLS opens the AUDIO CONTROLS menu, which is used to customize the Main Zone audio output c

RV-8 Audio Controls4-3The BASS parameter controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Fr

Audio Controls Lexicon4-4AUDIO CONTROLS (continued)TILT EQ –3.0dB to +3.0dBControls the amount of tilt equalization applied to the Main Zoneaudio out

RV-8 Audio Controls4-5The LOUDNESS parameter controls the amount of low-frequency boost that is automatically applied to the Main Zone audio output co

Audio Controls Lexicon4-6AUDIO CONTROLS (continued)BALANCE L< <|> >RControls the left-to-right balance of the Main Zone audio outputconn

5Tuner PresetsTuner Presets ...5-2

Basic Operation Lexicon2-2FRONT-PANEL OVERVIEWThe RV-8 is shown below. The numbers in the front-panel illustrations correspond with the numbered items

Tuner Presets Lexicon5-2TUNER PRESETSSelecting TUNER PRESETS from the MAIN MENU displays a list of the pages of existing presets. The preset number, p

RV-8 Tuner Presets5-3LISTEN TO PRESETLoads the current preset station. Press the menu  arrow to loadthe station preset. The front panel and on-screen

6Mode AdjustMode Adjust ...6-2Listening Mode Activation...

Mode Adjust Lexicon6-2MODE ADJUSTSelecting the MODE ADJUST option opens the MODE ADJUST menu, which isused to select a listening mode for adjustment.

RV-8 Mode Adjust6-3PREFERRED LISTENING MODE SELECTION The INPUT SETUP menus include four preferred listening modeselection parameters labeled 2-CH, DO

Mode Adjust Lexicon6-4LISTENING MODE DESCRIPTIONSEach listening mode description lists the default and possible settings for each listening mode menu

RV-8 Mode Adjust6-5L7 MUSICThis listening mode is designed for playback of 2-channel stereo ormatrix-encoded music sources. Logic 7 MUSIC is a proprie

Mode Adjust Lexicon6-6DOLBY PLIIx + THX & DOLBY PLII + THXDolby Pro Logic IIx technology is an extension to Dolby Pro Logic IIthat enables the lis

RV-8 Mode Adjust6-7DOLBY PLIIx MOV & DOLBY PLII MOVIEDolby Pro Logic IIx technology is an extension to Dolby Pro Logic IIthat enables the listener

RV-8 Basic Operation2-31 FRONT-PANEL DISPLAYUse the front-panel display to view the current input, listeningmode, input source and volume level. If t

Mode Adjust Lexicon6-8DOLBY PLIIx MUS & DOLBY PLII MUSICDolby Pro Logic IIx technology is an extension to Dolby Pro Logic IIthat enables the liste

RV-8 Mode Adjust6-9DOLBY PL + THX This mode is designed for playback of Dolby Surround-encodedsources and decodes four channels: three front channels

Mode Adjust Lexicon6-10DTS NEO:6 + THXThis mode is designed for playback of matrix-encoded digital stereofilm sources. DTS Neo:6 derives six channels

RV-8 Mode Adjust6-11NIGHTCLUBThe NIGHTCLUB mode is designed for playback of “dry” musicsources that benefit from the addition of room reflections,espe

Mode Adjust Lexicon6-12CHURCHThe CHURCH mode uses a reverb algorithm to emphasize the rich,smooth, reverberant decay characteristic of small and mediu

RV-8 Mode Adjust6-13PANORAMAThe PANORAMA mode is designed for playback of stereo andmatrix-encoded sources. PANORAMA uses proprietary Lexiconalgorithm

Mode Adjust Lexicon6-14To calibrate the PANORAMA listening mode:1. Remove all obstructions between the speakers and the primarylistening position.2. M

RV-8 Mode Adjust6-152-CH SURROUNDThis mode, designed for playback of stereo sources, sends the leftchannel to Front, Side and Rear Left channels and t

Mode Adjust Lexicon6-16MONO SURROUNDThis mode, designed for playback of mono sources, sends themono source to all channels.MONOThis mode, designed for

RV-8 Mode Adjust6-175.1 L7 TVThis proprietary Lexicon listening mode is designed for playback of5.1-channel Dolby Digital-encoded broadcast sources. B

Basic Operation Lexicon2-4FRONT-PANEL OVERVIEW (continued)4 MAIN ZONE INPUT SELECTION BUTTONSSelects the corresponding input in the Main Zone. When a

Mode Adjust Lexicon6-18THX, THX UL2Cin & THX SurEX These modes are designed for 7-channel playback of 5.1-channel DolbyDigital film sources that d

RV-8 Mode Adjust6-19• ASA processing is applied to signals sent to the rear speakers.Refer to the ASA parameter description on page 3-31 for moreinfor

Mode Adjust Lexicon6-205.1 PLIIx MOV The 5.1 PLIIx MOV (MOVIE) listening mode is designed to play back7.1 discrete channels decoded from 5.1-channel D

RV-8 Mode Adjust6-215.1 PLIIx MUS The 5.1 PLIIx MUS (MUSIC) listening mode is designed to playback 7.1discrete channels decoded from 5.1-channel Dolby

Mode Adjust Lexicon6-22DOLBY DIGITAL & DOLBY DIGITAL EX These listening modes are designed to decode and play back 5.1discrete channels from 5.1-c

RV-8 Mode Adjust6-235.1 2-CHANNELThis mode, recommended for recording purposes, is designed forconverting 5.1-channel Dolby Digital-encoded input sour

Mode Adjust Lexicon6-245.1 MONO SURRThis listening mode, designed for playback of Dolby Digital-encodedmono sources, sends mono signals to all channel

RV-8 Mode Adjust6-25DTS-ES DECODINGThe DTS, DTS-ES, and DTS-ES Discr listening modes are designedfor, at a minimum, playback of 5.1-channel DTS, 5.1-c

Mode Adjust Lexicon6-26DTS-ES L7 FILM & DTS L7 FILMThese proprietary Lexicon listening modes use an advanced matrix todecode seven channels from 5

RV-8 Mode Adjust6-27DTS-ES THX & DTS THX UL2CinThe DTS THX UL2Cin (ULTRA2 CINEMA) and DTS-ES THX listeningmodes allow 7-channel playback of 5.1-ch

RV-8 Basic Operation2-511 MUTE BUTTONMutes or restores the RV-8 Main Zone volume to its original level. Pressthe Mute button to mute volume level; “M

Mode Adjust Lexicon6-28DTS-ES THX & DTS THX UL2CIN (continued)DTS THX MUSICThe DTS THX MUSIC listening mode is designed for playback of5.1-channel

RV-8 Mode Adjust6-29DTS 2-CHAN & DTS-ES 2-CHANThese modes, recommended for recording purposes, senddownmixed 5.1-channel or 6.1-channel DTS-ES inp

Mode Adjust Lexicon6-305.1a L7 MUSICThe 5.1a LOGIC7 MUSIC listening mode is similar to the 5.1aLOGIC7 FILM listening mode, but specifically tailored f

RV-8 Mode Adjust6-31 The 5.1a THX UL2Cin listening modeThe 5.1a THX UL2Cin listening mode is available when both sideand rear speakers are present and

Mode Adjust Lexicon6-325.1a THX MUSICThe 5.1a THX MUSIC listening mode is designed for playback of5.1-channel analog music sources. It cannot be activ

RV-8 Mode Adjust6-335.1a 2-CHANNELThis mode downmixes 5.1-channel analog input signals into2-channel LOGIC7-encoded output signals. It sends these si

Mode Adjust Lexicon6-342CH BYPASSThis listening mode sends 2-channel analog audio input signals tothe Main Zone audio output connectors labeled Front

RV-8 Mode Adjust6-35HEADPHONE DTSHEADPHONE DTS is a proprietary Lexicon listening mode designedfor enhanced playback of DTS(-ES)-encoded music or film

Mode Adjust Lexicon6-36See “Listening Mode Menu Option and Parameter Descriptions” on page 6-39 for detailed descriptions.LIVE! MED parameter settings

RV-8 Mode Adjust6-37OUTPUT LEVELSOpens the OUTPUT LEVELS menu, which isused to adjust output levels for the MainZone audio output connectors labeledCe

Basic Operation Lexicon2-6REAR-PANEL OVERVIEWThe RV-8 is shown below. The numbers in the rear-panel illustrations correspond with the numbered items i

Mode Adjust Lexicon6-38RESET MODERestores the factory-default version of the selected listening mode,restoring all listening mode menu parameters to t

RV-8 Mode Adjust6-39LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS5 SPKR ENHANCE ON, OFFSimulates 7-channel playback in 5-channel speaker confi

Mode Adjust Lexicon6-40LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS (continued)CENTER OFF, –30 to +12dBControls the output level of the audio

RV-8 Mode Adjust6-41EARLY RFLX LVL –80dB to +12dB, OFFControls the amount of additional early reflections. Available in allLIVE! modes.EFFECT LVL –12

Mode Adjust Lexicon6-42LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS (continued)• This parameter is available in 5.1 PLIIx MOV, 5.1 PLIIx MUS,

RV-8 Mode Adjust6-43MASTER LEVEL –5 to +5dBAdjusts the output level of 2-channel Logic 7-encoded sources.Available in 5.1 2-CHANNEL and DTS(-ES) 2-CHA

Mode Adjust Lexicon6-44LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS (continued)REAR L/R –30 to +12dB, OFFControls the output level of the Mai

RV-8 Mode Adjust6-45SOURCE RIGHT, LEFT & RIGHT, LEFTControls the perceived direction of the PANORAMA listening modeexternal calibration source sig

Mode Adjust Lexicon6-46LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS (continued)When AUTO is selected, THX Surround EX decoding is engaged whe

RV-8 Mode Adjust6-47MODE – PARAMETER RELATIONSHIPSThe following table lists each parameter and the modes in which it is used. The parameter... Is used

RV-8 Basic Operation2-71 AMPLIFIER OUTPUTSProvide audio outputs to the speakers. The Center channel outputand all Right channel outputs are located on

Mode Adjust Lexicon6-48EX DECODING 5.1 PLIIx MOV, 5.1 PLIIx MUS, DOLBY DIGITAL EX and DOLBY DIGITALFRONT STEERING L7 TV, L7 MUSIC, L7 MUSIC SURR, al

RV-8 Mode Adjust6-49SIZE NIGHTCLUB, CONCERT HALL, CHURCH, CATHEDRAL and all LIVE! modesSOUND STAGE All L7 modesSOURCE PANORAMA CALIBRATIONSPEAKER AN

7Troubleshooting and MaintenanceTroubleshooting...7-2Routine Maintenance...

Troubleshooting and Maintenance Lexicon7-2TROUBLESHOOTINGThe RV-8 does not power on.1. Make sure the rear-panel power switch is set to the | (“on”)pos

RV-8 Troubleshooting and Maintenance7-32. Check the INPUT SETUP menu VIDEO IN and COMPONENT IN(page 3-11) parameters to ensure the appropriate videoco

Troubleshooting and Maintenance Lexicon7-4ROUTINE MAINTENANCEThe bulleted items below describe routine maintenance that shouldbe performed on a period

AAppendixSpecifications ... A-2Declaration of Conformity ...

Appendix A LexiconA-2SPECIFICATIONSAudio Input & Output ConnectorsAnalog Audio Inputs Eight stereo (RCA) or five stereo and one 5.1-channel or 2 s

RV-8 Appendix AA-3Composite & S-Video PerformanceCompatibility NTSC, PAL and SECAMSwitching ActiveOutput Level 1.0V peak-to-peakImpedance75ΩInput

IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this

Basic Operation Lexicon2-8REAR-PANEL OVERVIEW (continued)6 ZONE 2 VIDEO OUTPUT CONNECTORSProvide video output in Zone 2. One composite video connecto

Appendix A LexiconA-4Specifications are subject to change without notice.Power Requirements 120-230 VAC, 50-60Hz, 60W (universal line input), detach-a

BAppendixMenu Tree...B-2

Appendix B LexiconB-2MENU TREEVOLUME CONTROL SETUPMAIN POWER ON -30dBMUTE LEVEL -30dBZ2 PWR ON -30dBZ3 PWR ON -30dBHEADPHONE -30dBMAX VOLUME +12dBLOCK

RV-8 Appendix BB-3SETUP MENU: INPUTS Selecting SETUP  INPUTS prompts the selection of the desired input (for example,DVD1). Selecting an input opens

Appendix B LexiconB-4 MAIN MENUMODE ADJUSTAUDIO CONTROLSTUNER PRESETSSelecting an INPUT SETUP menu item opens the cor-responding menu shown below. The

RV-8 Appendix BB-5SETUP MENU: SPEAKERSSPEAKER SETUPSET CROSSOVERSCHECK MICROPHONESAUTOMATICMANUALSETUPINPUTSSPEAKERSI/O CONFIGDISPLAYSVOLUME CONTROLST

Appendix B LexiconB-6SETUP MENU: SPEAKERS (continued) SPEAKER SETUPSET CROSSOVERSCHECK MICROPHONESAUTOMATICMANUALSET CROSSOVERSBEFORE CALIBRATING(MI

RV-8 Appendix BB-7 CUSTOM SETUP40 Hz60 Hz60 Hz60 Hz40 HzOFFN/AAPARTAUTO SPEAKER SETUP!CAUTION!HIGH AUDIO LEVELSYOU WILL HAVE 10 SECTO LEAVE THE ROO

Appendix B LexiconB-8AUTO SPEAKER SETUPAUTO LEVELSFRONT LEFTCENTERFRONT RIGHTSIDE RIGHTREAR RIGHTREAR LEFTSIDE LEFTSUBWOOFERERROR+0.0dB+0.0dB+0.0dB+0.

RV-8 Appendix BB-9 75 to 120dBONOFFSPEAKER LEVEL ADJUSTFRONT LEFTCENTERFRONT RIGHTSIDE RIGHTREAR RIGHTREAR LEFTSIDE LEFTSUBWOOFER+0.0dB+0.0dB+0.0dB+0.

RV-8 Basic Operation2-9putting the RV-8 into standby. The trigger output connector(labeled 1) can be configured for remote or program operation. See“T

Appendix B LexiconB-10SETUPINPUTSSPEAKERSI/O CONFIGDISPLAYSVOLUME CONTROLSTRIGGERTUNER SETUPLOCK OPTIONSLIVE! CALIBRATIONMAIN MENUMODE ADJUSTAUDIO CON

RV-8 Appendix BB-11TUNER SETUPREGION USASCAN SENS LOWAUTOLOADCLEAR ALLTUNER PRESETSDISPLAY RDS NAMERADIO TEXT ONSCROLL RATE MEDIUMAUTO FREQUENCY ONMAI

Appendix B LexiconB-12MAIN MENUMODE ADJUSTAUDIO CONTROLSTUNER PRESETSSETUPTUNER PRESETS01 0.00FM02 0.00FM03 0.00FM04 0.00FM05 0.00FM06 0.00FM07 0.00FM

RV-8 Appendix BB-13MAIN MENU: MODE ADJUST MAIN MENUMODE ADJUSTAUDIO CONTROLSTUNER PRESETS* These listening mode names differ depend-ing on the curren

Appendix B LexiconB-14MAIN MENU: MODE ADJUST (continued) 2-CHANCENTER MIXCNTR DLY SAMPLES LFE MIXMASTER LEVEL+0dB+0SURROUND MIX+0dBSUB L/R LVLCUSTOM

RV-8 Appendix BB-15Selecting the listening mode menu CALIBRATION, OUTPUT LEVELS or CUSTOM option opens the corresponding menu path shown below. The CA

Appendix B LexiconB-16MAIN MENU: MODE ADJUST (continued) 10 to 100msPRE-DELAYOFF, 1 to 30ms10 to 90deg-20.0 or -10.0 to +0.0dBOFF, -30 to 12dB4 to 2

RV-8 Appendix BB-17MAIN MENU: RESTORE DEFAULTS2CH STATUSINPUTMODEINPUT TYPESAMPLE RATEdB0-6-15-30-45RL D STATUSINPUTMODECHANNELSBIT RATEdB0-6-15-3

CAppendixRemote Control Programming ...C-2Three-Digit Preprogrammed Codes ...

Basic Operation Lexicon2-10TUNER OVERVIEWThe RV-8 features an AM/FM stereo radio tuner. The front paneldisplays the currently selected frequency, band

Appendix C LexiconC-2REMOTE CONTROL PROGRAMMINGThe RV-8 remote control has been designed to provide a new standardin remote control technology offerin

RV-8 Appendix CC-3MACRO OPERATIONSA “macro” is a series of commands that can be sent out with the pushof a single button. Any function available on an

Appendix C LexiconC-4REMOTE PROGRAMMING OVERVIEWThe first task is to get all original remote controls together. You mayhave one or more components tha

RV-8 Appendix CC-5USING PREPROGRAMMED CODESTo program the remote to make it compatible with othercomponents:1. Manually power on the device to be oper

Appendix C LexiconC-6work with the device. Make note of the code if it seems to be theright one, and try the next one. You are trying to find the one

RV-8 Appendix CC-7code is the one that will have the functions that more closelymatch the device than the others, so it is advised to try them all.See

Appendix C LexiconC-8PROGRAMMING THE FUNCTION BUTTONSTo program the Function Buttons:1. Go to the SETUP mode by pressing both the HOME and ENTbuttons

RV-8 Appendix CC-9Note:Follow these instructions only if you actually want a code sent whenchanging devices. It may not be desired to send out codes w

Appendix C LexiconC-10PROGRAMMING MACRO BUTTONSA “macro” is a series of commands that can be sent with the push of asingle button. There are two types

RV-8 Appendix CC-117. Return to step 4 until all desired commands are programmed.8. Save the commands selected to the macro button by pressing theCH U

RV-8 Basic Operation2-11SCAN MODE Scan Mode scans through all available stations, pausing for twoseconds on each station before scanning to the next o

Appendix C LexiconC-12Note:A macro can end on any page, including the HOME page. In the previousexample, the macro was ended on the SAT page before sa

RV-8 Appendix CC-13ERASING FAVORITE CHANNEL BUTTONSTo erase favorite channel buttons:1. Go to the SETUP mode by pressing both the HOME and ENTbuttons

Appendix C LexiconC-145. To edit DEVICE button text, skip Steps 3 and 4 and press the PAGEbutton before selecting the Device button.6. The character t

RV-8 Appendix CC-154. If you wish to erase all the learned functions in the RV-8 remote,press the ALL button and then press the SURE? button at the ne

Appendix C LexiconC-16ADJUSTING THE LCD CONTRASTTo adjust the LCD contrast:Pressing the HOME button and Up on the joystick simultaneously willmake the

RV-8 Appendix CC-17REPROGRAMMING THE ZONE AUDIO CODES TO DEFAULT CODESTo reprogram the RV-8 zone audio codes:1. Simultaneously press MAIN and ENT butt

Appendix C LexiconC-18THREE-DIGIT PREPROGRAMMED CODESAUDIOManufacturer CodesADC 007ADCOM 082 092 225 161 269AIWA 018 104 170 202 203 213 211 188AKAI

RV-8 Appendix CC-19AUDIOManufacturer CodesPANASONIC 032 195 219 177PARASOUND 129 130 132 261PHAST 196PHILIPS 249 250 251 063PIONEER 014 033 039 04

Appendix C LexiconC-20SATManufacturer CodesALPHASTAR 123AMPLICA 050BIRDVIEW 129 113 051 126BSR 053CAPETRONICS 053CHANNEL MASTER 013 014 015 018 036

RV-8 Appendix CC-21VCRManufacturer CodesAIWA 034 161AKAI 016 043 046 124 125 146AMPRO 072ANAM 031AUDIO DYNAMICS 012 023 039 043BROOKSONIC 035 037 1

Basic Operation Lexicon2-12For example, if Preset #01 is FM 90.90 and the call letters are WABC,then the name for that position is WABC. If Preset #23

Appendix C LexiconC-22VCRManufacturer CodesSANYO 003 007 010 014 134 102SCOTT 017 037 112 129 131SEARS 003 008 009 010 013 014 081 101 017 073 112S

RV-8 Appendix CC-23TVManufacturer CodesFUJITSU 198FUNAI 028 043FUTURETECH 043GE 197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183GO

Appendix C LexiconC-24TVManufacturer CodesSUPRE MACY 002SYLVANIA 197 003 059 060 063 064 164 044 160 127TANDY 081TATUNG 056 062TECHNICS 034 080TECHW

RV-8 Appendix CC-25CDManufacturer CodesKENWOOD 185 007 023 055 071 072 142 137KOSS 061KRELL 241KYOCERA 005LOTTE 102LUXMAN 011 028 070 076LXI 059MAGN

Appendix C LexiconC-26LDManufacturer CodesDENON 206 207FUNAI 120KENWOOD 152 013MAGNAVOX 032 121MARANTZ 211MITSUBISHI 121NAD 121OPTIMUS 049 013PANASONI

RV-8 Appendix CC-27CABLEManufacturer CodesABC 103 003 004 039 042 046 053AMERICAST 099ANTRONIX 014ARCHER 005 007 014BELL SOUTH 099CENTURION 092CENT

Appendix C LexiconC-28TAPEManufacturer CodesAIWA 015 071 100 114CARVER 006 008 027 024 036DENON 105 227 229FISHER 064GOLDSTAR 011HARMAN KARDON 233

DAppendixInstallation Worksheet...D-2

Appendix D LexiconD-2INSTALLATION WORKSHEETINPUT SETUP DVD1 DVD2 SAT VCR TV CD TUNER PHONONAMEDIGITAL INANALOG INANLG IN LVLVIDEO INCOMPONENT IN2-CHD5

RV-8 Appendix DD-3 SPEAKER SETUP CUSTOM SETUP THX SETUP SPEAKER DISTANCES LEVELS CALIBRATIONFRONT LEFT/RIGHTTHX 80HzCENTERTHX 80HzSIDE LEFT/RIGHTTH

RV-8 Basic Operation2-13AMPLIFIER OVERVIEWThe RV-8 features a 7-channel power amplifier with 140W perchannel. The RV-8 can be configured so that all a

Appendix D LexiconD-4 INSTALLATION WORKSHEET (continued)DISPLAY SETUP TRIGGER SETUP TUNER SETUPON-SCREEN DISPLAYCircle all parameters set to ON.REGIO

RV-8 Appendix DD-53-DIGIT PREPROGRAMMED CODES WORKSHEET COMPONENT MANUFACTURER CODE(S) USEDDVD1DVD2SATVCRTVCDPHONO

Appendix D LexiconD-6PREPROGRAMMED LCD TEXT FOR OTHER DEVICES DVD1PROG MENUDISPL SETUPCLEAR MEMOREPEA TITLEA-B SHUFFPAGE 1SYSTEM-OFFPOWERVOL UPVOL

RV-8 Appendix DD-7 TVT/V INPUTSLEEP A-CHCC ADDCC-SN DELETRESET ANTPAGE 1SYSTEM-OFFPOWERVOL UPVOL DNCH UPCH DNMUTEPRE-CHUPDOWNLEFTRIGHTSELECTPLAYSTO

Numerics2 ST. & (2) 5.1 ANLG option, 3-612.0 ENCODING parameter, 2-342CH BYPASS listening mode, 6-342CH BYPASS STATUS menu, 2-322-CH MODE menu, 3-

Index LexiconI-2CATHEDRAL listening mode, 6-12CENTER DEPTH parameter, 6-11, 6-12, 6-40CENTER MIX LVL parameter, 2-34CENTER MIX parameter, 6-23, 6-29,

RV-8 IndexI-3II/O CONFIG SETUP menu, 3-2INPUT BALANCE parameter, 6-13, 6-42input connectors, 2-7microphone, 2-8INPUT NAME menu, 3-5INPUT parameter, 2-

Index LexiconI-46-10, 6-11, 6-12, 6-13, 6-15, 6-16, 6-17, 6-19, 6-20,6-21, 6-22, 6-23, 6-26, 6-27, 6-28, 6-29, 6-30, 6-31,6-32, 6-33, 6-43Output level

RV-8 IndexI-59 parameter, 3-17, 3-18S-VIDEO OSD 43 parameter, 3-17, 3-20S-Video output connectors, 2-8Tthree-digit preprogrammed codes, C-18THX listen

Basic Operation Lexicon2-14HEADPHONE OVERVIEWHeadphones can be connected to the RV-8 via the Headphoneoutput on the front panel. The headphone output

PRODUCT REGISTRATIONPlease register this product within 15 days ofpurchase. To do so, complete and return this cardor register online at www.lexicon.c

A Harman International CompanyPart No. 070-15838 | Rev 1 | 01/06

RV-8 Basic Operation2-15MAIN MENUUse the MAIN MENU to open the four mainmenu branches: MODE ADJUST, AUDIOCONTROLS, TUNER PRESETS and SETUP.MENU NAVIGA

Basic Operation Lexicon2-16MENU OPTIONSSelecting a menu option opens another menu within the menustructure. For example, selecting SETUP from the MAIN

RV-8 Basic Operation2-17REMOTE CONTROL BUTTONS1. SYSTEM POWER OFF2. Displays the name of the selected device.3. POWER ON4. Device and function buttons

Lexicon Inc.3 Oak ParkBedford, MA 01730-1413 USATel 781-280-0300Fax 781-280-0490www.harmanspecialtygroup.comCustomer ServiceTelephone: 781-280-0300Sal

Basic Operation Lexicon2-18COMMAND MATRIXThe command matrix describes the commands that the remote control buttons performwhen each command bank is ac

RV-8 Basic Operation2-1921345678BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE21Enters RV-8 standby mode. Reserved for future expansion.2Activate

Basic Operation Lexicon2-20* History-dependent buttons perform different functions, depending on the Zone or device that is currently being controlled

RV-8 Basic Operation2-21BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE29Selects the VCR input for Zone 3.Increases the AUDIO CONTROLS menu BASS p

Basic Operation Lexicon2-22* History-dependent buttons perform different functions, depending on the Zone or device that is currently being controlled

RV-8 Basic Operation2-23BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE217Decreases Zone 3 volume level in.1dB increments. Decreases Main Zone vol

Basic Operation Lexicon2-24* History-dependent buttons perform different functions, depending on the Zone or device that is currently being controlled

RV-8 Basic Operation2-25BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE225If the RV-8’s built-in tuner is the currentlyselected input, press  on

Basic Operation Lexicon2-26* History-dependent buttons perform different functions, depending on the Zone or device that is currently being controlled

RV-8 Basic Operation2-27BUTTON ZONE3 PAGE1 ZONE3 PAGE2 DVD1 PAGE1 DVD1 PAGE233When a menu is open, closes the menu and, inmost cases, opens the previo

Introduction LexiconiiDOCUMENTATION CONVENTIONSThis document contains general safety, installation and operation instructions for the RV-8 Receiver. I

Basic Operation Lexicon2-28UNDERSTANDING THE ZONESThe RV-8 features three zones of operation: the Main Zone, Zone 2and Zone 3. The Main Zone controls

RV-8 Basic Operation2-29ZONE 3 TWO-LINE STATUSOpens in the on-screen and front-panel displayswhenever the RV-8 detects a Zone 3 statuschange. The Zone

Basic Operation Lexicon2-302CH STATUSProvides information about 2-channel input sources. Features L andR level meters.See “STATUS Menu Parameter Descr

RV-8 Basic Operation2-31STATUSProvides information about DTS(-ES) input sources. Includes L, C, R,SL, SR, SB and LFE level meters. The SB level meter

Basic Operation Lexicon2-322CH BYPASS STATUSProvides information about 2-channel analog input sources whenthe MAIN ADV menu 2-CH ANLG BYP parameter is

RV-8 Basic Operation2-335.1 ANALOG STATUSProvides information about 5.1-channel analog input sources.See “STATUS Menu Parameter Descriptions” on page

Basic Operation Lexicon2-34STATUS MENU PARAMETER DESCRIPTIONS2.0 ENCODING MATRIX, NONEIndicates whether or not a matrix-encoded source is detected.Whe

RV-8 Basic Operation2-35INPUTIndicates the selected input (e.g., DVD1).INPUT TYPE ANLG, BYP, PCM, MIC, ---Indicates the input source that is present.

3SetupSetup...3-2Input Setup...

RV-8 IntroductioniiiTable of ContentsDocumentation Conventions... iiGetting StartedAbout the RV-8

Setup Lexicon3-2SETUP Selecting SETUP from the MAIN MENU opens the SETUP menu.INPUTSPrompts the selection of a desired input (e.g., DVD1) and opens th

RV-8 Setup3-3TUNER SETUPOpens the TUNER SETUP menu, which is used to configure the AM/FM tuner. See “TUNER SETUP” on page 3-72 for more information.LO

Setup Lexicon3-4INPUT SETUPSelecting the SETUP menu INPUTS option prompts the selection of a desired input (e.g., DVD1). Selecting an input opens the

RV-8 Setup3-5CHANGING INPUT NAMESSelecting the INPUT SETUP menu NAME parameter opens the INPUT NAME menu, which is used to customize or restore the fa

Setup Lexicon3-6RESTORE DEFAULT NAMERestores the factory-default name of the selected input. Factory-default input names correspond to front-panel and

RV-8 Setup3-7ASSIGNING AUDIO and VIDEO INPUT CONNECTORSThe RV-8 has eight configurable inputs, each of which can be assigned to its eight digital audi

Setup Lexicon3-8ASSIGNING AUDIO and VIDEO INPUT CONNECTORS (continued)ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), PHONO, TUNER, NONE, LIVE!Opens

RV-8 Setup3-9ANLG IN LVL AUTO, –18dB to +12dBOpens the ANLG IN LVL menu, which is used to adjust the 2-channelanalog audio input levels for the select

Setup Lexicon3-10ASSIGNING AUDIO and VIDEO INPUT CONNECTORS (continued)AUTO ON, OFFProvides automatic adjustment of analog audio input levels. Whenset

RV-8 Setup3-11VIDEO IN COMPOSITE-1 TO 5, S-VIDEO-1 TO 5, NONEOpens the VIDEO IN menu, which is used to assign a composite orS-Video input connector fo

Introduction LexiconivAudio ControlsAudio Controls ...4-2Tuner PresetsTuner Pre

Setup Lexicon3-12SELECTING PREFERRED LISTENING MODESPreferred listening modes can be pre-selected so that when aparticular type of input source is pla

RV-8 Setup3-13When a preferred listening mode is selected, that listening mode isautomatically activated whenever a new input is selected or anappropr

Setup Lexicon3-14SELECTING PREFERRED LISTENING MODES (continued)The Use Last ParameterWhen the RV-8 is set to use a preferred listening mode for a sel

RV-8 Setup3-152-CHOpens the 2-CH MODE menu, which is used to select a preferredlistening mode for 2-channel input sources. The RV-8 activates theselec

Setup Lexicon3-16SELECTING PREFERRED LISTENING MODES (continued)Opens the DTS(-ES) MODE menu, which is used to select a preferredlistening mode for DT

RV-8 Setup3-17CONFIGURING ADVANCED INPUT SETTINGSMAIN ADVANCEDSelecting the INPUT SETUP menu MAIN ADVANCED option opensthe MAIN ADV menu shown above.

Setup Lexicon3-18CONFIGURING ADVANCE INPUT SETTINGS (continued)ANALOG BYPASS ON, OFFWhen set to ON, the RV-8 passes the analog input signal to the Mai

RV-8 Setup3-19INPUT SELECT PARAMETER SETTINGSDIGITAL ANALOG AUTOThe RV-8 sends the assigned digital audioinput connector to the Main Zone audiooutput

Setup Lexicon3-20CONFIGURING ADVANCE INPUT SETTINGS (continued)S-VIDEO OSD 4:3 ON, OFFControls the appearance of the on-screen display when the displa

RV-8 Setup3-21LEGACY VIDEO A, BWhen video played back from a VCR is converted to componentvideo by the RV-8, the resulting picture quality depends on

1Getting StartedAbout the RV-8... 1-2Highlights . . . . . . . . . . . . . . .

Setup Lexicon3-22ZONE2 IN PARAMETER SETTINGSDIGITAL ANLG (Analog) DMIX (Downmix)• The RV-8 automatically setsthe ZONE2 IN parameter toDIGITAL when the

RV-8 Setup3-23ZONE2 ADVANCEDOpens the ZONE2 IN menu, which is used to configure advanced ANLG IN LVL -18 to +12dBAllows adjustment of analog audio inp

Setup Lexicon3-24DIGITAL BYPASS ON, OFFAllows digital sources to bypass decoding for direct digital recording.When ON is selected, the RV-8 passes dig

RV-8 Setup3-25SPEAKER SETUPSelect the SPEAKER SETUP menu to configure the Main Zone audio output connectors for the desired speaker setup. The Main Zo

Setup Lexicon3-26CUSTOM SPEAKER SETUPSSelecting the CROSSOVER SETUP menu CUSTOM SETUP option opens the CUSTOM SETUP menu, which assigns independent cr

RV-8 Setup3-27In general, low frequencies will be redirected from speakers with the highest crossover points to speakers with the lowest crossover poi

Setup Lexicon3-28THX SPEAKER SETUPSSelecting THX SETUP opens the THX SPEAKER SETUP screen, which indicates that pressing the arrow button will automa

RV-8 Setup3-29SPEAKER SETUP PARAMETERSThe table below indicates the speaker setup parameters for config-uring the Main Zone audio output connectors fo

Setup Lexicon3-30SPEAKER SETUP PARAMETERS (continued)MAIN MENUMODE ADJUSTAUDIO CONTROLSTUNER PRESETSCROSSOVER SETUPCUSTOM SETUPTHX SETUPCR SR RRL

RV-8 Setup3-31FRONT L/R FULL, FULL + SUB, 30 to 120HZ, THX 80HZAssigns a crossover point for the Main Zone audio output connectorslabeled Front L/R wh

Getting Started Lexicon1-2ABOUT THE RV-8Thank you for purchasing the RV-8 Receiver, an 8-channel audioand video control center with independent zone m

Setup Lexicon3-32SPEAKER SETUP PARAMETERS (continued)SIDE L/R FULL, FULL + SUB, 30 to 120Hz, THX 80Hz, NONEAssigns a crossover point for the Main Zone

RV-8 Setup3-33SUBWOOFER FULL, 30 TO 120 Hz, THX 80Hz, NONEAssigns a crossover point for the Main Zone audio output connectorlabeled Subwoofer. When s

Setup Lexicon3-34SPEAKER SETUP PARAMETERS (continued)THX ULTRA2 SUB ON, OFFIndicates whether or not the subwoofer connected to the Main Zoneaudio outp

RV-8 Setup3-35BGC (BOUNDARY GAIN COMPENSATION) ON, OFFAdjusts boundary gain compensation when the CUSTOM and THXSETUP menu THX ULTRA2 SUB parameter is

Setup Lexicon3-36AUTOMATIC CALIBRATIONThe RV-8 offers automatic calibration of speaker distances, output level, or both. The table below indicates ava

RV-8 Setup3-37CONNECTING THE MICROPHONESCAUTION!• The microphones included in the Lexicon Microphone Kitrequire careful handling. Dropping or otherwis

Setup Lexicon3-38POSITIONING THE MICROPHONES FOR THE MICROPHONE CHECKRefer to the microphone placement examples that begin below to position the micro

RV-8 Setup3-39During the microphone check, DO NOT:7 Separate the microphones7 Scatter the microphones throughout the listeningspace7 Obstruct the line

Setup Lexicon3-40CHECKING THE MICROPHONESNote the following:• The RV-8 outputs calibration noise signals between 55dB and95dB, beginning with 55dB and

RV-8 Setup3-41CHECKING MICROPHONESAppears in the on-screen display whilethe RV-8 confirms the microphone levelcalculated during the silence check. Tod

RV-8 Getting Started1-3powerful processors perform custom Lexicon processing such asLogic 7 decoding, bass enhancement, dialogue enhancement, autoazim

Setup Lexicon3-42CHECKING THE MICROPHONES (continued)POSITIONING THE MICROPHONES FOR AUTOMATIC CALIBRATIONProper microphone placement is essential to

RV-8 Setup3-43When calibrating for a single listeningposition, place the microphones:3 As close together as possible in a single listeningposition (th

Setup Lexicon3-44POSITIONING THE MICROPHONES FOR AUTOMATIC CALIBRATION (continued)When calibrating for multiple listeningpositions in a single row, po

RV-8 Setup3-45When calibrating for multiple listeningpositions in multiple rows, position themicrophones:3 At the approximate spot where the listener’

Setup Lexicon3-46POSITIONING THE MICROPHONES FOR AUTOMATIC CALIBRATION (continued)During the automatic calibration, do not:7 Arrange the microphones a

RV-8 Setup3-47During the automatic calibration, do not:7 Arrange the microphones along the perimeter ofthe listening positions or space7 Position the

Setup Lexicon3-48PERFORMING AUTOMATIC CALIBRATION STEP DISTANCES DISTANCES & LEVELS LEVELS12AUTO SPEAKER SETUPSPEAKER SETUPSET CROSSOVERSCHECK MIC

RV-8 Setup3-49STEP DISTANCES DISTANCES & LEVELS LEVELS3This step does not occur when the AUTO SPEAKER SETUP menu LEVELS option is selected.4This s

Setup Lexicon3-50PERFORMING AUTOMATIC CALIBRATION (continued)STEPDISTANCESDISTANCES & LEVELS LEVELS5FRONT LEFTRefer to the table on page3-52 for i

RV-8 Setup3-51STEP DISTANCES DISTANCES & LEVELS LEVELS6AUTO DISTANCES*FRONT LEFTCENTERFRONT RIGHTSIDE RIGHTREAR RIGHTREAR LEFTSIDE LEFTSUBWOOFER12